19045 Farmington Road
Livonia, Michigan 48152
Phone (248) 476 - 4200
Fax (248) 476 - 5705
The Lighting Resource for Machine Vision
VISION-LIGHTS.COM
|
The Lighting Resource for Machine Vision VISION-LIGHTS.COM
|
|
Products for Machine Vision
| 2010 Series -
|
 | This family of illumination systems is designed as a cost-effective solution for many machine vision applications. The common configuration for this family is a single lamp, in a single enclosure. The systems are designed around a high frequency precision electronic ballast, which incorporates state-of-the-art control features. |
|
The compact fluorescent lamps utilized in the 2010 systems provide uniform light with an average lifetime of >8000 hours continuous use. The lamp output will be maintained to approximately ±1.0 % during the life of the lamp. Lamps are pre-burned in a controlled environment within our facility to insure consistent light output right out of the package. This service is also provided for replacement bulbs. The 17S1 and 23S1 models offer a lamp dimmer control as an option. |
|
This precise control is ideal for use in machine vision applications where constant luminous flux is critical for the inspection. The high frequency power supply operates at >40KHz so that sensors with electronic shutters capabilities can be used. |
|
The system can be order with a power entry module incorporating an internal fuse with standard style power line cord or a permanently attached STO line cord. |
|
Illumination systems can be purchased with a variety of lamp temperatures (colors) to meet specific project requirements; these include 4100, 3500 & 3100. |
|
The units are designed for 110 - 125VAC, single-phase operation and requires two (2) type GMA-2 fuses (5mm x 20mm), each 1.0 A maximum. |
|
The industrial grade aluminum extrusion housings provide "T-slots" on the back of the enclosure for easy mounting in any orientation. |
Shown above is the Standard 2010-17S1 system.
Fluorescent lamp characteristics: Part # Tube Lamp(s) Output Uniform Housing Overall Length Wattage (Lumens) Length Width Length 13S1 12.8" tube 27 1620 8" Single 3.15" 17.0" 13S2 12.8" tube 52 3240 8" Double 6.30" 17.0" 17S1 16.5" tube 39 2510 15" Single 3.15" 20.5" 17S2 16.5" tube 78 5020 15" Double 6.30" 20.5" 23S1 22.5" tube 39 2700 20" Single 3.15" 26.5" 23S2 22.5" tube 78 5400 20" Double 6.30" 26.5" 23S1HO 21.5" tube 50 4100 28.5" Single 3.15" 26.5" 33S1 33" tube 96 5000* 30" Single 3.15" 36.5"
Fluorescent lamp temperatures (colors): Temperature Order Specification Code 5000 K Special Order /SPX50 4100 K (standard configuration) /841 3500 K must specify /835 3100 K must specify /831
* - estimated output
1) Yellow STO 16 gauge, 10 foot standard length, no
connector
2) Standard Line cord, 16 gauge 8 foot length, 3 prong
connector
|
Copyright © 2002- 2004
PHOENIX IMAGING
|
