High Output LED Backlights
with Quick-Connections for time critical manufacturing applications
The 4500 & 4505 Series of backlights represent the latest in Phoenix
Imaging LED technology.
The units are less than 12 mm thick and can fit in to tight locations that other
units can not. The units are comprised of a large number of surface mount
LEDS arranged in compact squares. The base size for these units are 30 mm
on a side and may be purchased in units as large as 150 x 180 mm.
Standard 4500-60/90 & 4505-30/60 Red LED Backlight
These units provide very flat illumination fields that extent almost up to
the edge of the units. The image below shows the uniformity of the LED
backlight. The illumination is uniform up to approximately 3 mm of the
edge. The purple color does not appear when viewing the LED backlight and
is an artifact of the camera used to acquire the image. The image below illustrates the uniformity using a special
optical filter.
Standard 4500-60/90 Red LED Backlight illumination field.
The 4500 series and the 4505 series are similar in exterior width and height
dimensions, the 4505 series is slightly thinner. The 4505 series does not
offer a nano-change™ connector on the housing of the LED light. The
cable is attached directly to the housing and has a nano-change connector at the
end of the 3M cable.
Technical Specification
Housing: Metal Aluminum 8 or 12mm thick
Design Current: .60 amps (small units)
Certification: CE marked
Life Rating: 100,000 hours
Operating Temperature: -40 to +158 F
All dimensions in figures A-F are in millimeters
