These unique illumination systems are designed for operation with up to four (4) lamps,
in single or dual lamp enclosure configurations. The system is designed around a precision
power supply that incorporates an active feedback loop that will consistently maintain
lamp output to approximately ±0.5% during the life of the lamps. This precise control is
ideal for use in machine vision applications where constant luminous flux is critical for
the inspection. The high frequency power supply provides a 5 volt DC output (blue wire in
terminal block) that indicates that the illumination system is operating correctly. The
LED mounted on the exterior of the power supply enclosure indicates that the unit is
within regulation limits when illuminated. Illumination systems can be purchased with a
variety of lamp temperatures (colors) to meet specific project requirements, these
include: Cool White (CW), Daylight (D), Warm White (WW), Blacklight (BL) and Blacklight
Blue (BLB). This unit is designed for 110 - 125VAC, single phase operation and requires
two (2) type GMA-2 fuses (5mm x 20mm), 2.0 A maximum.
Phoenix Imaging designs and fabricates a wide selection of advanced lighting systems
used in machine vision applications. If you do not see the lighting system that
meets your specific project requirements on these web pages be sure to contact our sales
department. We have a designed and built lighting systems for too many applications
to describe all within the context of this web site. A few of the more common
specialized lighting systems are described in this section.